If your phone can boot to Recovery Mode but not to Android, use this method. It requires a microSD card.
Fastboot mode allows direct communication between the phone and a computer, which can be useful for recovering from a botched root or custom recovery installation. How to Unbrick INFINIX Note 30 Pro
If your device is stuck on the Infinix logo or a boot loop, a factory reset via Recovery Mode is often the first and easiest solution. This will erase all user data. Power Off: Press and hold the Power button until the device shuts down. Enter Recovery Mode: Simultaneously press and hold the Power button Volume Up button Bypass "No Command": If your phone can boot to Recovery Mode
When the Infinix logo appears, release the Power button but keep holding Volume Up. Once the "No command" screen appears, hold the Power button Wipe Data: Use the Volume buttons to navigate to "Wipe data/factory reset" and press Power to select it. "Factory data reset" and wait for the process to complete. "Reboot system now" to restart the phone. Method 2: Flashing Stock Firmware (For Hard Bricks) If your device is stuck on the Infinix
Wait until a pop-up window appears featuring a large labeled "Download OK". 🔄 First Boot and Setup
: If the phone still bootloops after a successful flash, boot into recovery mode (Hold Volume Up + Power), select Wipe Data / Factory Reset , and reboot.
Press and hold the for roughly 10 to 15 seconds until the phone vibrates or the INFINIX logo appears.