Ds-80249 -p Rev 1.2 Firmware 🔖

Connect a SOIC8 test clip directly over the chip pins without unsoldering it, or desolder the chip carefully using a hot-air rework station.

If you are looking to update or troubleshoot this specific board, these official Hikvision Support guides are the standard references: Upgrading Firmware : You can typically upgrade via the local GUI under Maintenance > Upgrade or through a web browser by navigating to Configuration > System > Maintenance Finding Version Info

The new firmware is attempting to read configuration data structures left behind by older revisions, resulting in a memory pointer error. ds-80249 -p rev 1.2 firmware

Download the formal firmware .dav file from the official Hikvision Download Portal. Format a USB flash drive to layout.

For safety and reliability, official firmware is always preferable. To find it, you must search by the (e.g., Hikvision DS-7108HGHI-E1 ), not the mainboard. Connect a SOIC8 test clip directly over the

⚠️ Downloading firmware from unofficial sources, such as the file-sharing and repair forums where this file is commonly found, carries inherent risks. Files from open forums may not have been verified. Flashing corrupted or incorrect firmware can permanently damage your device. Always proceed with caution and try to find official support from Hikvision or your device's manufacturer if possible.

: As this hardware dates back to 2017, it may no longer receive active feature updates. Focus updates on resolving security vulnerabilities or IP camera compatibility (e.g., ONVIF support for newer Tapo or Dahua cameras). 3. Update Procedure Format a USB flash drive to layout

Open the metal casing and locate the 8-pin SPI Flash memory chip (usually a Winbond or Macronix chip near the main processor).