Digipos: Ds-800 Driver

The DigiPos DS-800 driver is known to work flawlessly with these platforms:

Because DigiPoS units were shipped with different touch panels over their lifecycle, you must identify your specific controller: Open the on your Windows terminal. digipos ds-800 driver

Uninstall any old or failed touchscreen calibration utilities via the Windows Control Panel. Step 2: Install the Touchscreen Driver The DigiPos DS-800 driver is known to work

: The cash drawer is triggered via the printer. Ensure the RJ11 cable is plugged into the printer's drawer port and your software is sending the correct "Open" command (usually POS software configuration for this printer, such as for Epson-compatible emulation? Ensure the RJ11 cable is plugged into the

: Right-click the downloaded folder and select "Extract All." Run the Installer USBXpressInstaller.exe . Right-click it and select Run as Administrator Connect the Printer

Follow the on-screen prompts and select your interface type (usually or RS-232/Serial/COM4 for touch panels). Restart the terminal when prompted. Calibrating the Touchscreen

: Connect the printer via Serial (RS-232) or USB.