Download the SG3524N Model from SnapMagic 0;d25; (formerly SnapEDA).
Inside the main directory, find the folder named LIBRARY . sg3524 proteus library download link
With the library installed, you can now build and test your circuit. Finding the Component Open the window in Proteus. Click on the Component Mode button on the left toolbar. Click the P button (Pick Devices). Type SG3524 into the keywords box. Select the component from the list and click OK . Basic Circuit Connections for Simulation Download the SG3524N Model from SnapMagic 0;d25; (formerly
If installed correctly, the component will appear under the active library list with a schematic preview. Double-click to add it to your workspace. Basic Test Circuit Setup To verify that the internal oscillator is firing: Connect Pin 15 ( VINcap V sub cap I cap N end-sub ) to a . Connect Pin 8 ( GNDcap G cap N cap D ) to the circuit ground. Connect Pin 16 ( VREFcap V sub cap R cap E cap F end-sub capacitor tied to ground. Attach a resistor ( RTcap R sub cap T ) to Pin 6 and a capacitor ( CTcap C sub cap T ) to Pin 7 to set up the internal frequency clock. Hook up a Proteus Oscilloscope to Pin 11 ( ) and Pin 14 ( Finding the Component Open the window in Proteus