Log in using the default administrative credentials found in your deployment documentation to begin initial configuration (IP addressing, routing protocols, and user access control).
Maintain at least 4 inches (10 cm) of clearance at the front and rear of the chassis for cabling, air circulation, and maintenance access. Tools and Equipment Required Phillips #1 and #2 screwdrivers Torque wrench with appropriate bits nokia 7250 ixr x1 installation guide
For local management and initial setup, the IXR-X1 provides several physical interfaces: Console Port Log in using the default administrative credentials found
Insert the appropriate optical transceiver modules into the high-speed line ports. The 7250 IXR-X1 uses a front-to-back or back-to-front
The 7250 IXR-X1 uses a front-to-back or back-to-front airflow design depending on the installed fan modules. Ensure at least 3 inches (7.6 cm) of clearance at the front and rear chassis vents. Electrical and Grounding Specs
Crimp an approved grounding cable (typically 6 AWG copper wire) to the provided two-hole grounding lug.
Locate the dual-hole grounding terminal on the rear or side of the chassis.